Search

Home › Fujitsu › Air Conditioners › 97

Fujitsu Air Conditioner 97 Error Code

Outdoor fan motor error. What it means, which models show it, and how to clear it, easiest fix first.

FujitsuAll Fujitsu air conditioner codes

97
Moderate DIY

The outdoor fan is turning far too slowly or not at all. Debris or ice against the blade, a locked or failed motor, high heat around the unit, or a board fault can cause it.

Compatible models

Fujitsu doesn't publish a model list for this code; it appears on Fujitsu air conditioners with a digital display. Check your owner's manual.

Also shown as

Lamp pattern: on models that show faults with the indicator lamps, Fujitsu's tables for many current wall-mounted (RL/RLS/RLX, LZAH), compact ducted (RGLX) and RLF multi-zone units show this code as the Operation lamp flashing 9 times and the Timer lamp flashing 7 times, with the Economy lamp marked "continuous". Other Fujitsu units, such as universal-mount and ceiling-suspended models, use different lamps. A wired controller shows the code as a number. Shown as 97.3 on some ceiling cassette models. Code 98 is the same fault on the second fan of two-fan outdoor units. On the older code set an outdoor fan fault used 1B. Fujitsu's older code set (for example older 9CQ/9RLQ/12CQ wall units, RMLQ-series multi-zone heads and some RCLX ceiling cassettes) uses different numbers for many faults, so always check the manual for your model.

Difficulty

Start with the safe checks below; a worn part may need replacing.

Safety first: unplug the air conditioner (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Fujitsu 97

  1. Clear around the outdoor unit

    With the breaker off, remove leaves, grass clippings, snow or anything stored against the outdoor unit, and keep about 2 ft (60 cm) clear on all sides. Brush loose debris off the outside of the coil fins by hand or with a soft brush; do not use a pressure washer or bend the fins. In winter, clear snow and ice from around the base and fan.

  2. Look at the fan blade

    With the breaker off, look through the grille for anything wedged against the blade. Clear debris from the outside of the grille only; don't reach through it or remove it, and leave anything lodged inside for the technician.

  3. Reset the power at the breaker

    Switch the system off with the remote, then turn off its circuit breaker in your home's main panel. Wait about 5 minutes, switch the breaker back on and restart the unit. If the code returns within a few minutes, write it down for the technician.

When to call a technician

If the blade is clear and the code returns, the fan motor or board needs an HVAC technician.

Parts linked to 97

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does 97 mean on a Fujitsu air conditioner?

The outdoor fan is turning far too slowly or not at all. Debris or ice against the blade, a locked or failed motor, high heat around the unit, or a board fault can cause it.

Which Fujitsu models show the 97 code?

Fujitsu doesn't publish a model list for this code; it appears on Fujitsu air conditioners with a digital display. Check your owner's manual.

Can I fix Fujitsu 97 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear 97, the cause is likely a worn part that needs replacing.

What if 97 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when 97 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Fujitsu air conditioner codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked