Home › Dryers

Dryer Error Codes by Brand

Dryer codes usually point to airflow, heat or sensors. A blocked lint screen or exhaust vent is the most common cause, and it also raises the risk of fire, so it is always worth checking first.

Choose your brand

• GE10 codes
• LG14 codes
• Samsung14 codes
• Whirlpool15 codes

Common dryer codes

• Check VentGE: Low airflow: the vent is likely blocked
• F09 (long dry time)GE: Loads are taking too long to dry
• d80LG: Exhaust vent is restricted (Flow Sense)
• tE1LG: Temperature sensor (thermistor) fault
• hESamsung: Heating error
• HC2Samsung: Gas ignition error (gas dryers)
• AF / F4E3Whirlpool: Restricted airflow: lint screen or vent blocked
• PFWhirlpool: Power was interrupted during the cycle

First checks for any dryer code

• Note the exact code and your model number before anything else.
• Unplug the dryer or switch off its breaker for 10 minutes, then try again. Many codes are one-off glitches.
• Clean the lint screen and check that the outside vent flap opens when the dryer runs. Restricted airflow causes many dryer codes and is a fire risk.
• On a gas dryer, if you smell gas, leave the house and call your gas company from outside.

Our dryer guides cover 53 codes across 4 brands. Each one explains the code in plain English, lists safe steps in order, and says clearly when to call a professional.