Guides Search

Home › Haier › Washers › dd

Haier Washer dd Error Code

Spin waiting on lid or load on Haier washers.

HaierAll Haier washer codes

dd
Easy DIY fix

Haier says dd isn't actually an error. It shows during spin as a prompt to check that the lid is shut and the load is balanced.

Compatible models

Haier portables (US) during the spin cycle. No specific models are named.

Also shown as

No other codes are listed for this fault.

Difficulty

Most people can clear this one at home with simple checks.

Not sure you are reading the code right? See how to read Haier washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Haier dd

  1. Check the lid

    Lower the lid all the way so it sits flat.

  2. Even out the load

    Open the lid once the drum stops and move clothes so they're spread around the tub instead of bunched on one side. Then close the lid and let the spin continue.

When to call a technician

dd hanging around with the lid closed and the load spread out: call Haier service.

Frequently asked questions

Which Haier models show the dd code?

Haier portables (US) during the spin cycle. No specific models are named.

Can I fix Haier dd myself?

Usually, yes. Most dd problems clear with simple checks you can do at home. Start with the first step above: check the lid.

Other Haier washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked