Home › Gree › Air Conditioners › L3
Gree Air Conditioner L3 Error Code
Outdoor fan airflow fault on Gree air conditioners.
GreeAll Gree air conditioner codes
The outdoor fan isn't running as the board expects. Debris caught in the blade, a heavy ice buildup in winter, or a failing outdoor fan motor are the likely causes.
Compatible models
Outdoor units of GREE's ductless systems. No model list is given for L3.
Also shown as
No other codes are listed for this fault.
Difficulty
Start with the safe checks below; a worn part may need replacing.
Not sure you are reading the code right? See how to read Gree air conditioner codes.
How to fix Gree L3
Cut power to the outdoor unit
Turn off the outdoor disconnect or the system breaker before going near the fan.
Clear debris and ice
Pull out sticks, leaves, and anything stuck in the fan grille. In winter, clear snow from around the unit and let ice melt on its own. Don't chip at it.
Watch the fan start
Restore power and check that the outdoor fan spins up when the compressor runs.
When to call a technician
If the fan won't turn by itself or the code returns, call a technician to check the outdoor fan motor and board.
Parts linked to L3
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Step-by-step guides for this problem
- AC Blowing Warm Air? 8 Causes and What You Can Fix Yourself
Warm air from an AC is most often a wrong mode setting, clogged indoor filters, or an outdoor unit that has lost power or stopped.
- Heat Pump Not Heating? Settings, Defrost and Fixes to Try
A heat pump that seems to stop heating is often just in its defrost cycle, which Trane says usually lasts 3 to 5 minutes and can send cool air or steam out of the outdoor unit.
Frequently asked questions
Which Gree models show the L3 code?
Outdoor units of GREE's ductless systems. No model list is given for L3.
Can I fix Gree L3 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear L3, the cause is likely a worn part that needs replacing.
Other Gree air conditioner codes
- E6Indoor and outdoor units can't communicate
- E1High pressure protection
- E3Low pressure protection
- E2Indoor coil freeze protection
- E5Over-current protection
- E7Mode conflict between indoor units
- E8High temperature protection from low indoor airflow
- E9Condensate overflow protection
- H6Indoor fan airflow fault
- F1Indoor room temperature sensor fault
- F2Indoor coil sensor fault
- F3Outdoor air temperature sensor fault
- F4Outdoor coil sensor fault
- F5Compressor discharge sensor fault
- H1Defrosting (normal in heat mode)
- H5Power module (IPM) protection
- C5Jumper cap missing or wrong
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.