Home › KitchenAid › Refrigerators › Cooling Off
KitchenAid Refrigerator Cooling Off Error Code
Cooling is switched off on KitchenAid refrigerators.
KitchenAidAll KitchenAid refrigerator codes
With COOLING OFF on the screen, the compressor won't run, so neither the fridge nor the freezer gets cold. People hit the button combination by accident while wiping the panel, and some models come back this way after an outage or surge. Nothing has failed; the fridge is doing what the setting tells it to.
Compatible models
KitchenAid French door bottom freezer refrigerators show this message; check your manual if your buttons are labeled differently.
Also shown as
The button pair can differ by model. KitchenAid's help page gives Lock plus Measured Fill as the usual method and points to the owner's manual for others.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read KitchenAid refrigerator codes.
How to fix KitchenAid Cooling Off
Switch cooling back on
Hold Lock and Measured Fill together for 3 seconds. Press them at exactly the same time; if one registers first you can end up locking the dispenser instead.
Check it's cooling again
The COOLING OFF message should disappear. Within a few hours the fresh food side should be heading back toward 37°F (3°C).
When to call a technician
If the message won't clear, or it keeps turning itself back on, contact KitchenAid service.
Parts linked to Cooling Off
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Step-by-step guides for this problem
Frequently asked questions
Which KitchenAid models show the Cooling Off code?
KitchenAid French door bottom freezer refrigerators show this message; check your manual if your buttons are labeled differently.
Can I fix KitchenAid Cooling Off myself?
Usually, yes. Most Cooling Off problems clear with simple checks you can do at home. Start with the first step above: switch cooling back on.
Other KitchenAid refrigerator codes
- F3E1Fresh food temperature sensor fault
- F3E2Freezer temperature sensor fault
- F3E4Evaporator (defrost) sensor fault
- F3E8 / F3E9Kitchen temperature or humidity sensor fault
- F4E1Defrost heater fault
- F6E1Display and main board can't talk to each other
- POPower went out long enough to warm the freezer
- Temperature AlarmFridge or freezer stayed too warm
- Door AlarmDoor or freezer drawer left open
- H2OWater filter due for replacement
Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.