Home › KitchenAid › Refrigerators › F6E1
KitchenAid Refrigerator F6E1 Error Code
Display and main board can't talk to each other on KitchenAid refrigerators.
KitchenAidAll KitchenAid refrigerator codes
The display on the door and the main control board have lost their data link. The wires for that link run from the cabinet into the door, so a pinched or loose connector along the way is one possible cause, along with a failed board. You may find the touch controls stop responding.
Compatible models
KitchenAid shows F6E1 on French door bottom freezer refrigerators with a door-mounted display; it doesn't publish a model list.
Also shown as
The tech sheet describes F6E1 as a communication failure between the appliance control unit and the user interface. Whirlpool's help site lists F6E1 for its French-door fridges too.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read KitchenAid refrigerator codes.
How to fix KitchenAid F6E1
Restart the fridge
Switch off the breaker or unplug the fridge for a minute and then restore power. A brief glitch after a storm or surge can clear this way.
Confirm it's still cooling
Once it's back on, make sure Cooling Off isn't showing and that the compartments begin to cool over the next couple of hours.
When to call a technician
If the code returns, a technician should trace the harness into the door and test both boards. Leave the hinge covers and board housings closed.
Parts linked to F6E1
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Frequently asked questions
Which KitchenAid models show the F6E1 code?
KitchenAid shows F6E1 on French door bottom freezer refrigerators with a door-mounted display; it doesn't publish a model list.
Can I fix KitchenAid F6E1 myself?
Only the basic checks. You can safely try the steps above, but F6E1 usually points to a part or fault that needs a technician.
Other KitchenAid refrigerator codes
- F3E1Fresh food temperature sensor fault
- F3E2Freezer temperature sensor fault
- F3E4Evaporator (defrost) sensor fault
- F3E8 / F3E9Kitchen temperature or humidity sensor fault
- F4E1Defrost heater fault
- POPower went out long enough to warm the freezer
- Temperature AlarmFridge or freezer stayed too warm
- Cooling OffCooling is switched off
- Door AlarmDoor or freezer drawer left open
- H2OWater filter due for replacement
Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.