Home › Washers › Hotpoint (UK) › F13
Hotpoint (UK) Washer F13 Error Code
Dryer temperature sensor fault (washer dryers). Here is what it means and how to clear it, easiest fix first.
On washer dryers only, this code means the drying temperature sensor has a fault, so the machine may not dry clothes.
Applies to UK/European Hotpoint machines only, not GE-made Hotpoint washers sold in the US. Indesit's UK service site lists the same code with the same meaning. Washer dryers only.
How to fix Hotpoint (UK) F13
Try one reset
Switch the machine off and unplug it. If there is water near the outlet or cord, switch off the circuit breaker instead of touching the plug. Wait a couple of minutes, plug it back in and try a short drying program. Ask the technician whether wash-only programs are safe to use until the repair.
Note the details for the technician
Write down the code, the program you were running and the model and serial numbers from the label inside the door. This helps the technician bring the right parts.
When to call a technician
If the code returns, book a technician to test the drying sensor and heater.
Parts that commonly cause F13
- Dryer temperature sensor (thermistor)
- Drying heater
Order parts by your exact model number so they fit.
Other Hotpoint (UK) washer codes
- F05Not draining: blocked pump filter or waste hose
- F06Door lock fault
- F01Electronic circuit board fault
- F18Internal data error
- F02Motor circuit fault
- F03Temperature sensor fault: not heating
- F07Heating circuit or board fault
- F08Heater fault
- F09Software fault
- F11Drain pump circuit fault
- F12Electronic control fault
- F15Heater control fault
- F16Drum position fault (top loaders)
Frequently asked questions
What does F13 mean on a Hotpoint (UK) washer?
On washer dryers only, this code means the drying temperature sensor has a fault, so the machine may not dry clothes.
Can I fix Hotpoint (UK) F13 myself?
Only the basic checks. You can safely try the steps above, but F13 usually points to a part or fault that needs a technician.
What if F13 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when F13 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.