Home › Frigidaire › Dishwashers › i50
Frigidaire Dishwasher i50 Error Code
Drain or wash motor problem on Frigidaire dishwashers.
FrigidaireAll Frigidaire dishwasher codes
The control detected a fault with the drain pump or the wash motor. AppliancePartsPros adds that it often traces to the circulation pump assembly, with wiring faults, failed windings or a jammed impeller among the causes.
Compatible models
Named in the use and care guides for the FGID2479SF (Gallery) and FPID2498SF (Professional). Frigidaire doesn't say which other models use it.
Also shown as
No other codes are listed for this fault.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read Frigidaire dishwasher codes.
How to fix Frigidaire i50
Clear the filter area
With the breaker off, remove the filter and check the sump for glass, bones or seeds that could jam a pump impeller.
Reset and listen
Restore power and clear the code. Start a cycle and listen for the wash motor running after the fill.
When to call a technician
If i50 comes back, book service. Testing motor windings and connections means working with the unit powered, which isn't a homeowner job.
Parts linked to i50
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
- circulation pump motor
- drain pump
Order parts by your full model number so they fit.
Frequently asked questions
Which Frigidaire models show the i50 code?
Named in the use and care guides for the FGID2479SF (Gallery) and FPID2498SF (Professional). Frigidaire doesn't say which other models use it.
Can I fix Frigidaire i50 myself?
Only the basic checks. You can safely try the steps above, but i50 usually points to a part or fault that needs a technician.
Other Frigidaire dishwasher codes
- i10Low fill detected
- i20Didn't drain completely
- i40 / iF0Clogged filter or sump
- i30Leak or overflow in the base pan
- i60Water heating problem
- iC0Electronic control problem
- PFPower was lost
- CL / CdDoor not latched
- Hd / HOHeating water before washing
- Status lights flashing after drainPossible shorted keypad
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.