Guides Search

Home › Frigidaire › Dishwashers › Status lights flashing after drain

Frigidaire Dishwasher Status lights flashing after drain Error Code

Possible shorted keypad on Frigidaire dishwashers.

FrigidaireAll Frigidaire dishwasher codes

Status lights flashing after drain
May need a pro

On models without a numeric display, the dishwasher drains and then flashes its status lights when it reads a shorted keypad.

Compatible models

Only on Frigidaire dishwashers with status lights and no numeric display.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read Frigidaire dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire Status lights flashing after drain

  1. Power down for 5 minutes

    Switch off the breaker, or unplug the unit, for about 5 minutes. Then turn it back on and try a cycle.

When to call a technician

If the lights keep flashing after a power-down, schedule service. The keypad may need replacing.

Parts linked to Status lights flashing after drain

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Frigidaire models show the Status lights flashing after drain code?

Only on Frigidaire dishwashers with status lights and no numeric display.

Can I fix Frigidaire Status lights flashing after drain myself?

Only the basic checks. You can safely try the steps above, but Status lights flashing after drain usually points to a part or fault that needs a technician.

Other Frigidaire dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked