Home › Frigidaire › Dishwashers › i60
Frigidaire Dishwasher i60 Error Code
Water heating problem on Frigidaire dishwashers.
FrigidaireAll Frigidaire dishwasher codes
The dishwasher's water heating system has a problem. The manual doesn't break it down further.
Compatible models
A Gallery and Professional series code: it's in the FGID2479SF and FPID2498SF manuals. Other Frigidaire models aren't confirmed.
Also shown as
No other codes are listed for this fault.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read Frigidaire dishwasher codes.
How to fix Frigidaire i60
Give it hot water to start
Run the kitchen hot tap until it's hot before starting a cycle. Cold incoming water makes the heater run much longer.
Clear and restart
Clear the code with Cancel or a 5-minute breaker reset, then run a normal cycle.
When to call a technician
If i60 returns, call Frigidaire service. The heater and its controls need electrical testing.
Parts linked to i60
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Step-by-step guides for this problem
- Dishwasher Not Cleaning Dishes? 9 Causes and Real Fixes
Dirty dishes usually trace back to a clogged filter, spray arm holes plugged with debris, water that isn't hot enough, or loading that blocks the spray.
- Dishwasher Not Drying? Rinse Aid, Settings and Real Fixes
An empty rinse aid dispenser is the most common reason dishes come out wet, followed by a dry setting that uses no heat.
Frequently asked questions
Which Frigidaire models show the i60 code?
A Gallery and Professional series code: it's in the FGID2479SF and FPID2498SF manuals. Other Frigidaire models aren't confirmed.
Can I fix Frigidaire i60 myself?
Only the basic checks. You can safely try the steps above, but i60 usually points to a part or fault that needs a technician.
Other Frigidaire dishwasher codes
- i10Low fill detected
- i20Didn't drain completely
- i40 / iF0Clogged filter or sump
- i30Leak or overflow in the base pan
- i50Drain or wash motor problem
- iC0Electronic control problem
- PFPower was lost
- CL / CdDoor not latched
- Hd / HOHeating water before washing
- Status lights flashing after drainPossible shorted keypad
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.