Home › Dryers › Samsung › dE

Samsung Dryer dE Error Code

Door not detected as closed. Here is what it means and how to clear it, easiest fix first.

dE
Easy DIY fix

The door, latch or door switch is not telling the control that the door is shut, so the dryer will not start. Clothing caught in the door or a door not pushed fully closed is the usual cause; a damaged latch, a failed door switch or loose wiring can also do it.

Samsung groups dC, dE, dF, do, d0, 1 DC and 1 dF as door errors. Parts guides describe dF as a door switch failure when the door is actually closed.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Samsung dE

  1. Check for obstructions

    Open the door and make sure no clothing or other item is caught in the opening or latch. Close the door firmly until it clicks.

  2. Inspect the latch

    Look at the latch and strike for damage or looseness. If the door is bent or the latch is broken, do not force it.

  3. Reset

    Turn the dryer off for a minute, then on again, close the door and start a cycle.

When to call a technician

If the door closes properly but the code continues, or the latch is damaged, book a repair. Do not tape over or bypass the door switch.

Parts that commonly cause dE

Order parts by your exact model number so they fit.

Other Samsung dryer codes

Frequently asked questions

What does dE mean on a Samsung dryer?

The door, latch or door switch is not telling the control that the door is shut, so the dryer will not start. Clothing caught in the door or a door not pushed fully closed is the usual cause; a damaged latch, a failed door switch or loose wiring can also do it.

Can I fix Samsung dE myself?

Usually, yes. Most dE problems clear with simple checks you can do at home. Start with the first step above: check for obstructions.

What if dE keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when dE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

References