Home › Refrigerators › GE › tC / tF

GE Refrigerator tC / tF Error Code

TurboCool or TurboFreeze is running (not an error). Here is what it means and how to clear it, easiest fix first.

How to fix GE tC / tF

1. Let the feature finish

   On most models these modes end by themselves after several hours; your owner's manual gives the exact time. If you turned one on deliberately, there's nothing to do.

2. Turn it off if you didn't mean to start it

   Press the TurboCool or TurboFreeze button again to cancel it. Check your owner's manual if your controls are labeled differently.

When to call a technician

No service is needed for these indicators. If a code you see isn't on GE's list, contact a technician.

Other GE refrigerator codes

• FFFrozen food may be thawing
• PFPower was interrupted
• CIIcemaker not working properly
• dEDefrost system not working properly
• DEDemo mode is on
• CCTemperature is out of range
• Icemaker green light flashingIcemaker stuck in a fault state
• Leak DetectedPossible leak at the water filter
• Door alarmDoor alarm keeps beeping

Frequently asked questions

What does tC / tF mean on a GE refrigerator?

These are normal function indicators, not faults. tC shows that TurboCool is speeding up refrigerator cooling, and tF shows that TurboFreeze is speeding up freezing. On some displays they can look like "EC" or "EF".

Can I fix GE tC / tF myself?

Usually, yes. Most tC / tF problems clear with simple checks you can do at home. Start with the first step above: let the feature finish.

What if tC / tF keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when tC / tF appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.