Home › Refrigerators › LG › Er 67
LG Refrigerator Er 67 Error Code
Door not closing fully. Here is what it means and how to clear it, easiest fix first.
LG links Er 67 to a gap in the door or something stopping the door from closing completely. A door that stays slightly open lets warm air in and can lead to frost and cooling problems.
How to fix LG Er 67
Clear anything in the way
Check door bins, shelves and tall items to make sure nothing hits the door or the inner door on Door-in-Door models. Rearrange food so the door closes without pushing.
Check the gasket
Look around the door seal for folds, tears or food stuck to it. Wipe it clean with warm, soapy water and dry it.
Make sure the fridge is level
Follow your manual to adjust the leveling legs so the fridge stands steady and the doors close evenly.
When to call a technician
LG lists this as a repair code. If nothing is blocking the door and the code continues, request service to check the door alignment.
Parts that commonly cause Er 67
- Door gasket
- Door hinge
- Door switch
Order parts by your exact model number so they fit.
Other LG refrigerator codes
- OFFFridge is in demo (display) mode
- Er FFFreezer fan is blocked or not running
- Er rFRefrigerator fan is not running properly
- Er dHDefrost cycle failed
- Er IFIce maker fan problem
- Er ISIce maker sensor fault
- Er ItIce maker motor or assembly fault
- Er gFWater flow sensor error
- Er COMain board and display are not communicating
- Er CFCondenser fan error
- Er FSTemperature sensor fault
- Er CHSealed system (refrigerant) fault
- Er 22Compressor relay problem
- FUCooling cycle error
- ttWater tank not detected
- SbSabbath mode is on
Frequently asked questions
What does Er 67 mean on a LG refrigerator?
LG links Er 67 to a gap in the door or something stopping the door from closing completely. A door that stays slightly open lets warm air in and can lead to frost and cooling problems.
Can I fix LG Er 67 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear Er 67, the cause is likely a worn part that needs replacing.
What if Er 67 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when Er 67 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.