Frigidaire Washer E48 Error Code

Door lock circuit fault on Frigidaire washers.

E48

May need a pro

The control found a fault in the door lock circuit. On several Frigidaire front-loaders E48 specifically means the board reads the door lock's sensing circuit as closed when it shouldn't be. The lock assembly, its wiring or the control board can be responsible.

Compatible models

Frigidaire front-load washers such as the FAFW4011LB, FAFW4221 and Affinity ATF7000FE. The FFTW4120SW top-loader uses Fd for lid lock failure instead.

Also shown as

Related front-load codes: E47 (door lock circuit reads open during spin) and E4A (door lock sensing problem). E43 and E45 also relate to the door lock on many models, but some service sheets list them as general control board faults, so check your model's tech sheet. Some top-load models show Fd for a failed lid lock.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Frigidaire washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire E48

Close the door and check the seal
Make sure nothing is caught between door and seal and that the door closes and latches cleanly.
Try a power reset
Switch off the breaker or pull the plug for 5 minutes, then run a short program.

When to call a technician

If E48 returns, book a technician to test the door lock and wiring. Never try to bypass the door lock.

Parts linked to E48

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

WasherTroubleshootingFront Load Washer Door Won't Open? Why It's Locked and What to Do
A front-load washer keeps its door locked while there's water in the drum, while the drum is still turning, or while the inside is hot, so a door that won't open usually means the washer hasn't drained.
5 min read6 stepsRead guide

Frequently asked questions

Which Frigidaire models show the E48 code?

Frigidaire front-load washers such as the FAFW4011LB, FAFW4221 and Affinity ATF7000FE. The FFTW4120SW top-loader uses Fd for lid lock failure instead.

Can I fix Frigidaire E48 myself?

Only the basic checks. You can safely try the steps above, but E48 usually points to a part or fault that needs a technician.

Other Frigidaire washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked