Frigidaire Washer E52 Error Code

Drive motor or speed signal fault on Frigidaire washers.

E52

May need a pro

The control isn't getting the right signal from the drive motor, or the motor is running too fast, too slow or drawing too much current. It can be anything from a jammed drum or worn bearing to a failed motor or motor control board.

Compatible models

Frigidaire front-loaders, including the FAFW4011LB and FAFW4221, the Affinity ATF7000FE, and the Affinity 6000 and 7000 series 3.5 cu. ft. washers.

Also shown as

E52 to E59 all relate to the drive motor: E52 and E59 are speed signal (tachometer) faults, E54 overspeed, E55 underspeed, and E56 to E58 high motor current. Exact meanings vary a little between model families.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Frigidaire washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire E52

Reduce the load
Unplug the washer, take out some items and make sure nothing is wedged between the drum and the door seal.
Turn the drum by hand
With the washer still unplugged, turn the drum slowly by hand. Grinding, catching or a drum that won't turn points to a mechanical problem for a technician.
Reset the control
Five minutes without power, then a short test cycle.

When to call a technician

If E52 comes back, a technician has to test the motor, its speed sensor, the drive belt and bearings, and the motor control board.

Parts linked to E52

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

WasherTroubleshootingWasher Won't Spin? 8 Causes and How to Fix Them at Home
A washer that won't spin is usually reacting to an unbalanced load, a low or no-spin setting, too many suds or water it can't drain.
5 min readRead guide

Frequently asked questions

Which Frigidaire models show the E52 code?

Frigidaire front-loaders, including the FAFW4011LB and FAFW4221, the Affinity ATF7000FE, and the Affinity 6000 and 7000 series 3.5 cu. ft. washers.

Can I fix Frigidaire E52 myself?

Only the basic checks. You can safely try the steps above, but E52 usually points to a part or fault that needs a technician.

Other Frigidaire washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked