Guides Search

Home › KitchenAid › Dishwashers › F1E1

KitchenAid Dishwasher F1E1 Error Code

Control module fault on KitchenAid dishwashers.

KitchenAidAll KitchenAid dishwasher codes

F1E1
May need a pro

The main control module has reported a problem with itself. It's a board-level fault, not a plumbing one.

Compatible models

Listed for KitchenAid dishwashers generally, without model numbers.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F1E1

  1. Turn it off at the source

    Pull the plug, or kill the breaker if it's hard-wired, and count to 30 before you bring the power back.

  2. See if it holds

    Run a short cycle. A code that only showed once may not come back.

When to call a technician

If the code shows up again after the reset, schedule service for the control board.

Parts linked to F1E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

Frequently asked questions

Which KitchenAid models show the F1E1 code?

Listed for KitchenAid dishwashers generally, without model numbers.

Can I fix KitchenAid F1E1 myself?

Only the basic checks. You can safely try the steps above, but F1E1 usually points to a part or fault that needs a technician.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked