Guides Search

Home › KitchenAid › Dishwashers › F7E2

KitchenAid Dishwasher F7E2 Error Code

Wash motor error on KitchenAid dishwashers.

KitchenAidAll KitchenAid dishwasher codes

F7E2
May need a pro

The control has picked up a fault with the wash (circulation) motor, the pump that sprays water through the arms. KitchenAid gives no homeowner fix beyond a reset.

Compatible models

Turns up on KitchenAid built-in dishwashers with F#E# codes; there's no published model list.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F7E2

  1. Reset it

    Kill the power for 30 seconds at the plug or breaker, then switch it back on.

  2. Run a short cycle and listen

    Start a quick cycle and listen for the hum of washing after the fill. Silence after the fill, or the code coming back, means it's time for service.

When to call a technician

Book a technician if the code returns. The wash motor and its connections need diagnosis inside the unit.

Parts linked to F7E2

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

Frequently asked questions

Which KitchenAid models show the F7E2 code?

Turns up on KitchenAid built-in dishwashers with F#E# codes; there's no published model list.

Can I fix KitchenAid F7E2 myself?

Only the basic checks. You can safely try the steps above, but F7E2 usually points to a part or fault that needs a technician.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked