KitchenAid Dishwasher F9E2 Error Code

Drain motor error on KitchenAid dishwashers.

KitchenAid All KitchenAid dishwasher codes

F9E2

May need a pro

The control has flagged a problem with the drain motor itself. A blockage downstream (hose, disposer) can make the pump struggle, so rule that out before you blame the motor.

Compatible models

Appears on F#E#-code KitchenAid dishwashers in general; no model list is published for it.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F9E2

Clear the drain path
With power off, check the disposer and sink drain for food buildup and straighten any kinked section of the drain hose. A brand-new disposer with its knockout plug still in place will block the drain completely.
Check the hose routing on a new install
If the dishwasher was just installed, look at where the drain hose runs. KitchenAid wants it on the correct side and inside the cabinet frame, not crushed behind the unit.
Power-cycle it
Leave it without power for half a minute, bring it back and run a short cycle.

When to call a technician

If F9E2 shows again after a reset with a clear drain path, book service. The drain pump motor is the likely repair.

Parts linked to F9E2

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

DishwasherTroubleshootingDishwasher Not Draining? 7 Fixes to Try Before Calling a Pro
A clogged filter, a garbage disposer that needs clearing (or a new one with its knockout plug still in), a blocked air gap or a kinked drain hose cause most drain problems.
5 min readRead guide

Frequently asked questions

Which KitchenAid models show the F9E2 code?

Appears on F#E#-code KitchenAid dishwashers in general; no model list is published for it.

Can I fix KitchenAid F9E2 myself?

Only the basic checks. You can safely try the steps above, but F9E2 usually points to a part or fault that needs a technician.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked

producthelp.kitchenaid.com