Guides Search

Home › KitchenAid › Dishwashers › F1E2 / F2E2

KitchenAid Dishwasher F1E2 / F2E2 Error Code

Main control communication error on KitchenAid dishwashers.

KitchenAidAll KitchenAid dishwasher codes

F1E2 / F2E2
May need a pro

The control boards have lost communication with each other. KitchenAid lists both F1E2 and F2E2 as main control communication errors.

Compatible models

KitchenAid uses both codes on its built-in dishwashers but doesn't say which models.

Also shown as

No other codes are listed for this fault.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Not sure you are reading the code right? See how to read KitchenAid dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix KitchenAid F1E2 / F2E2

  1. Reset the electronics

    Leave the dishwasher without power for a full 30 seconds. Then turn it back on and see if the panel lights up normally.

  2. Try one cycle

    Start a short cycle. If it runs through with no code, you can keep using it and keep an eye out for repeats.

When to call a technician

A returning communication code means a board or the wiring between boards needs a technician.

Parts linked to F1E2 / F2E2

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which KitchenAid models show the F1E2 / F2E2 code?

KitchenAid uses both codes on its built-in dishwashers but doesn't say which models.

Can I fix KitchenAid F1E2 / F2E2 myself?

Only the basic checks. You can safely try the steps above, but F1E2 / F2E2 usually points to a part or fault that needs a technician.

Other KitchenAid dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked