Home › LG › Dishwashers › CR
LG Dishwasher CR Error Code
Stuck in test mode. What it means, which models show it, and how to clear it, easiest fix first.
CR means continuous run, a test mode used by installers and technicians. It is turned on by holding three buttons at once, sometimes by accident.
Compatible models
LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.
Also shown as
No other codes are listed for this fault.
Difficulty
Most people can clear this one at home with simple checks.
How to fix LG CR
Exit test mode
Press Power to turn the dishwasher off, wait one to two minutes, then turn it back on.
Avoid accidental button combinations
Test mode starts when three buttons are held at the same time. Clean the control panel with the dishwasher switched off, and avoid leaning on the buttons, so they are not pressed together by accident.
When to call a technician
If CR keeps showing after a restart, request LG service.
Frequently asked questions
What does CR mean on a LG dishwasher?
CR means continuous run, a test mode used by installers and technicians. It is turned on by holding three buttons at once, sometimes by accident.
Which LG models show the CR code?
LG doesn't publish a model list for this code; it appears on LG dishwashers with a digital display. Check your owner's manual.
Can I fix LG CR myself?
Usually, yes. Most CR problems clear with simple checks you can do at home. Start with the first step above: exit test mode.
What if CR keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when CR appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other LG dishwasher codes
- IENot filling with enough water
- OENot draining
- AE / E1Leak detected in the base
- FEToo much water in the tub
- bEToo many suds
- HEWater not heating properly
- tETemperature sensor problem
- LE / CEWash motor problem
- nESpray arm control (vario) problem
- PEWater level sensor problem
- F31Heat dry fan not running
- F35Heat dry temperature fault
- F37Auto-open door not working
- PFPower interruption
- CLControl lock is on
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.