Home › Dishwashers › LG › tE
LG Dishwasher tE Error Code
Temperature sensor problem. Here is what it means and how to clear it, easiest fix first.
The control is getting an abnormal reading from the temperature sensor (thermistor), or the water went above about 194°F (90°C). A loose connection or a failed sensor is the usual cause.
How to fix LG tE
Reset the power
Turn the dishwasher off, then switch off its circuit breaker for about 10 seconds and switch it back on. Power the unit up and start a fresh cycle to see whether the code returns.
Note the code and model number
Write down the exact code, when in the cycle it appeared, and the model and serial numbers from the rating label (usually on the side or top edge of the door or tub). With nothing safe left to check yourself, this lets the technician bring the right part on the first visit.
When to call a technician
If tE comes back after a reset, have a technician inspect the thermistor and its wiring.
Parts that commonly cause tE
- thermistor
Order parts by your exact model number so they fit.
Other LG dishwasher codes
- IENot filling with enough water
- OENot draining
- AE / E1Leak detected in the base
- FEToo much water in the tub
- bEToo many suds
- HEWater not heating properly
- LE / CEWash motor problem
- nESpray arm control (vario) problem
- PEWater level sensor problem
- F31Heat dry fan not running
- F35Heat dry temperature fault
- F37Auto-open door not working
- PFPower interruption
- CLControl lock is on
- CRStuck in test mode
Frequently asked questions
What does tE mean on a LG dishwasher?
The control is getting an abnormal reading from the temperature sensor (thermistor), or the water went above about 194°F (90°C). A loose connection or a failed sensor is the usual cause.
Can I fix LG tE myself?
Only the basic checks. You can safely try the steps above, but tE usually points to a part or fault that needs a technician.
What if tE keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when tE appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.