Search

Home › Whirlpool › Dishwashers › F1E1

Whirlpool Dishwasher F1E1 Error Code

Control board fault. What it means, which models show it, and how to clear it, easiest fix first.

WhirlpoolAll Whirlpool dishwasher codes

F1E1
May need a pro

Whirlpool lists the control module (main control board) as the likely cause. An older Sears PartsDirect table describes it more specifically as a stuck relay on the board. A reset may clear it; otherwise the board needs service.

Compatible models

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.

Also shown as

On models without a digital display, the Clean light shows this as 1 quick flash, a short pause, then 1 flash, repeating after a longer pause.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool F1E1

  1. Reset the control

    Unplug the dishwasher for 30 seconds, then plug it back in. If it is hard-wired, switch off its breaker at the electrical panel for 30 seconds instead, then switch it back on and try a cycle.

  2. Note the code and model number

    Write down the exact code, when in the cycle it appeared, and the model and serial numbers from the rating label (usually on the side or top edge of the door or tub). With nothing safe left to check yourself, this lets the technician bring the right part on the first visit.

When to call a technician

If F1E1 returns after a reset, schedule service.

Parts linked to F1E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does F1E1 mean on a Whirlpool dishwasher?

Whirlpool lists the control module (main control board) as the likely cause. An older Sears PartsDirect table describes it more specifically as a stuck relay on the board. A reset may clear it; otherwise the board needs service.

Which Whirlpool models show the F1E1 code?

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dishwashers with a digital display. Check your owner's manual.

Can I fix Whirlpool F1E1 myself?

Only the basic checks. You can safely try the steps above, but F1E1 usually points to a part or fault that needs a technician.

What if F1E1 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when F1E1 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Whirlpool dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked