Home › Dishwashers › Whirlpool › FAE5 / F10E5
Whirlpool Dishwasher FAE5 / F10E5 Error Code
Diverter leak. Here is what it means and how to clear it, easiest fix first.
Whirlpool links this code to a leak at the diverter. Loose water connections can also leave water where the dishwasher does not expect it.
On models without a display, the Clean light flashes 10 times, pauses, then 5 times.
How to fix Whirlpool FAE5 / F10E5
Check for leaks
Switch off the dishwasher's breaker (or unplug it if the plug is dry and away from any water). Remove the toe kick panel and look for water under the unit, then check that the water supply and drain hose connections are snug and not dripping.
Clear the code and test
Restore power, press Cancel twice to clear the code, then try starting a fresh cycle.
When to call a technician
If the code returns or you find water under the unit, schedule service.
Parts that commonly cause FAE5 / F10E5
- diverter assembly
Order parts by your exact model number so they fit.
Other Whirlpool dishwasher codes
- F9E1Long drain (slow or no drain)
- F9E2Drain motor error
- F8E1 / H2ONo water detected
- F8E2Fill valve electrical error
- F8E4Water in the drip tray
- F8E5Fill valve stuck open
- F6E3Too many suds
- F6E4Water float switch fault
- F7E2Wash motor error
- F4E2 / F4E3Heating error
- F3E2Temperature or soil sensor fault
- F6E1Control panel or main control error
- F1E1Control board fault
- F1E2 / F2E2Control communication error
- F2E1Stuck button or console error
- FAE4 / F10E4Diverter valve error
- Sanitize light flashingLoad was not sanitized
- Control lock light blinks 3 timesControls are locked
- All cycle and option lights flashingCycle paused (door opened)
Frequently asked questions
What does FAE5 / F10E5 mean on a Whirlpool dishwasher?
Whirlpool links this code to a leak at the diverter. Loose water connections can also leave water where the dishwasher does not expect it.
Can I fix Whirlpool FAE5 / F10E5 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear FAE5 / F10E5, the cause is likely a worn part that needs replacing.
What if FAE5 / F10E5 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when FAE5 / F10E5 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.