Electrolux Dryer E21 / E22 Error Code

Condensate drain pump fault on Electrolux dryers.

E21 / E22

Moderate DIY

A condensing dryer pulls water out of the air and pumps it to a container or a drain hose. These codes mean the pump circuit has failed or the water can't get away. Sears PartsDirect starts with the harness between the pump and main board, then looks for a clogged pump or drain hose, then replaces the pump, and only after that the board.

Compatible models

Condensing models; Sears PartsDirect's source table is for the Electrolux compact condensing dryer.

Also shown as

Sears PartsDirect lists them as Ex21 and Ex22 for the Electrolux compact condensing dryer.

Difficulty

Start with the safe checks below; a worn part may need replacing.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Electrolux dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E21 / E22

Empty the water container
Pull out the condensed-water container (often a drawer at the top or bottom of the front panel) and empty it. Slide it all the way back in.
Check the drain hose
If your dryer drains to a sink or standpipe, unplug it and follow the hose. Straighten kinks and make sure the end isn't pushed too far down or blocked.
Clean the filters
Lint that gets past the filters ends up in the water path. Clean the lint filter and any second filter or condenser your manual tells you to rinse.

When to call a technician

If the water path is clear and the code returns, a technician should check the pump wiring and replace the pump if needed. Don't run the dryer while water is collecting where it shouldn't.

Parts linked to E21 / E22

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Electrolux models show the E21 / E22 code?

Condensing models; Sears PartsDirect's source table is for the Electrolux compact condensing dryer.

Can I fix Electrolux E21 / E22 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear E21 / E22, the cause is likely a worn part that needs replacing.

Other Electrolux dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked

www.searspartsdirect.com