Electrolux Dryer E92 / E98 Error Code

Control panel doesn't match the main board on Electrolux dryers.

E92 / E98

May need a pro

The user interface and main board aren't compatible. Sears PartsDirect says this shows up after the wrong panel or board has been installed.

Compatible models

Electrolux compact condensing dryer; the source is Sears PartsDirect.

Also shown as

Sears PartsDirect lists them as Ex92 and Ex98 for the Electrolux compact condensing dryer.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Electrolux dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Electrolux E92 / E98

Think back to the last repair
If a board was just replaced, the new part number probably doesn't match your model. Find the model and serial numbers on the label inside the door or on the back.
Contact whoever did the repair
Ask them to confirm the part against your full model number.

When to call a technician

The fix is installing the compatible part, which is technician work.

Parts linked to E92 / E98

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

Which Electrolux models show the E92 / E98 code?

Electrolux compact condensing dryer; the source is Sears PartsDirect.

Can I fix Electrolux E92 / E98 myself?

Only the basic checks. You can safely try the steps above, but E92 / E98 usually points to a part or fault that needs a technician.

Other Electrolux dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked

www.searspartsdirect.com