Home › Electrolux › Dryers › E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6
Electrolux Dryer E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6 Error Code
Main control board failure on Electrolux dryers.
ElectroluxAll Electrolux dryer codes
Sears PartsDirect files all of these under a main board failure. For E83, E86 and E87 it goes straight to replacing the board; for the EH4 to EHF and EF6 group it first checks the harness between the main board and user interface.
Compatible models
The Electrolux compact condensing dryer, as listed in Sears PartsDirect's table.
Also shown as
Sears PartsDirect writes them with an x (Ex83, ExH4, ExF6 and so on) for the Electrolux compact condensing dryer.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read Electrolux dryer codes.
How to fix Electrolux E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6
Unplug for 5 minutes
Let the electronics power down completely, then plug in and try a short program.
Get the numbers ready
If the code returns, copy the exact code plus the model and serial number from the rating label. Boards are specific to the model.
When to call a technician
Board and harness work happens inside the dryer; book a technician.
Parts linked to E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Frequently asked questions
Which Electrolux models show the E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6 code?
The Electrolux compact condensing dryer, as listed in Sears PartsDirect's table.
Can I fix Electrolux E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6 myself?
Only the basic checks. You can safely try the steps above, but E83 / E86 / E87 / EH4 / EHd / EHE / EHF / EF6 usually points to a part or fault that needs a technician.
Other Electrolux dryer codes
- E45Door open
- E21 / E22Condensate drain pump fault
- E31 / E32Humidity sensor failure
- E52 / E54Motor overheated or drum jammed
- E51 / E53Drive motor failure
- E5AMotor inverter board overheated
- E57 / E58 / E59 / E5d / E5E / E5F / E5HMotor drive (inverter) fault
- E62 / E63 / E64Compressor fault (heat pump models)
- E70 / E71Temperature sensor problem
- E9EControl panel buttons not responding
- E91Control panel communication failure
- E92 / E98Control panel doesn't match the main board
- EH1 / EH2 / EH3 / E5CPower supply out of range
Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.