LG Washer tCL Error Code
Time to clean the tub. Here is what it means and how to clear it, easiest fix first.
This isn't a fault. tCL is a reminder that it's time to run a Tub Clean cycle to keep odors and residue from building up.
Shown on many front-load, top-load and SideKick pedestal models.
How to fix LG tCL
Empty the drum
Remove all laundry before cleaning.
Run Tub Clean
Add a washer cleaner, such as a cleaning tablet or the amount of bleach your manual recommends, and start the Tub Clean cycle. The reminder clears after the cycle finishes.
When to call a technician
If tCL keeps showing right after a completed Tub Clean cycle, contact LG support.
Other LG washer codes
- OEWater won't drain
- IEWasher isn't filling with water
- UELoad is unbalanced
- dEDoor or lid won't lock
- LEMotor is locked or overloaded
- FETub has overfilled
- PEWater level sensor problem
- tETemperature sensor error
- SudToo many suds
- CLControl lock is on
- PFPower was interrupted
- CEMotor current too high
- dHEDrying fan motor problem
- FFWasher is frozen
Frequently asked questions
What does tCL mean on a LG washer?
This isn't a fault. tCL is a reminder that it's time to run a Tub Clean cycle to keep odors and residue from building up.
Can I fix LG tCL myself?
Usually, yes. Most tCL problems clear with simple checks you can do at home. Start with the first step above: empty the drum.
What if tCL keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when tCL appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.