Home › Midea › Air Conditioners › P1
Midea Air Conditioner P1 Error Code
Portable AC water tank is full on Midea air conditioners.
MideaAll Midea air conditioner codes
On Midea portable air conditioners, P1 means the bottom collection tray is full of condensate. The unit stops cooling until you drain it.
Compatible models
Listed on Midea's US support FAQ for its portable air conditioners. The page doesn't single out models.
Also shown as
On Midea mini-splits P1 is an older code for a voltage fault (now PC 01), so it means something different there.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Midea air conditioner codes.
How to fix Midea P1
Drain the tray
Turn the unit off and unplug it. Set a shallow pan under the drain at the back, unscrew the drain cap, and let the water run out. Tip the unit back slightly to get the last of it, then refit the cap firmly.
Connect a drain hose for humid days
Midea's fix is to connect the drain hose and drain the water away. Run the hose downhill to a floor drain or bucket so gravity can do the work.
When to call a technician
If P1 keeps coming back, Midea says to call for service. A stuck water level switch is one possibility.
Parts linked to P1
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Frequently asked questions
Which Midea models show the P1 code?
Listed on Midea's US support FAQ for its portable air conditioners. The page doesn't single out models.
Can I fix Midea P1 myself?
Usually, yes. Most P1 problems clear with simple checks you can do at home. Start with the first step above: drain the tray.
Other Midea air conditioner codes
- EL 01Indoor and outdoor units have lost contact
- EH 00Indoor board memory (EEPROM) fault
- EH 03Indoor fan speed out of range
- EH 60Room temperature sensor fault
- EH 61Indoor coil sensor fault
- EH 0bIndoor main board and display aren't talking
- EL 0CPossible refrigerant leak detected
- EC 07Outdoor fan speed out of control
- EC 53Outdoor air temperature sensor fault
- EC 52Outdoor coil sensor fault
- EC 54Compressor discharge sensor fault
- PC 00Inverter power module (IPM) protection
- PC 01Supply voltage too high or too low
- PC 02Compressor or power module overheating
- PC 04Inverter compressor drive error
- PC 08Over-current protection
- PC 0LToo cold outside to run
- E1Portable AC room temperature sensor fault
- E2Portable AC evaporator sensor fault
- E4Portable AC display panel communication fault
- ASWindow AC room temperature sensor fault
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.