Bosch Dishwasher E19 Error Code

Detergent dispenser fault. Here is what it means and how to clear it, easiest fix first.

E19

May need a pro

The control has found a fault in the circuit for the detergent dispenser solenoid, the small part that pops the dispenser lid open.

Newer US models show E6900. European guides list E19 as a fault that needs service.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Bosch E19

Check the dispenser lid
With the dishwasher switched off, make sure the lid opens and closes freely and isn't clogged with old detergent. A tablet that is too big for the compartment can also jam it.
Reset the dishwasher at the breaker
Switch off the dishwasher's circuit breaker, wait about 30 seconds, then switch it back on. Run a short cycle with the dishwasher empty and watch whether the same code comes back. A code that clears and stays away was likely a one-time glitch.

When to call a technician

If E19 returns, call Bosch support or a technician to test the dispenser and its wiring.

Parts that commonly cause E19

Detergent dispenser

Order parts by your exact model number so they fit.

Other Bosch dishwasher codes

Frequently asked questions

What does E19 mean on a Bosch dishwasher?

The control has found a fault in the circuit for the detergent dispenser solenoid, the small part that pops the dispenser lid open.

Can I fix Bosch E19 myself?

Only the basic checks. You can safely try the steps above, but E19 usually points to a part or fault that needs a technician.

What if E19 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when E19 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

References