Home › Bosch › Dishwashers › H01
Bosch Dishwasher H01 Error Code
Delay start is set (not an error). What it means, which models show it, and how to clear it, easiest fix first.
BoschAll Bosch dishwasher codes
H01 is not a fault. It shows the delay start timer is on and the cycle will begin in 1 hour; H02 means 2 hours, and so on.
Compatible models
Bosch doesn't publish a model list for this code; it appears on Bosch dishwashers with a digital display. Check your owner's manual.
Also shown as
Shown as H01, H02, and so on up to the longest delay your model offers. Button layout varies by model.
Difficulty
Most people can clear this one at home with simple checks.
How to fix Bosch H01
Cancel the delay
Press the + or - button next to the display until it shows h:00, then start the cycle as normal. Your manual shows the exact buttons for your model.
Or let the timer run
If you set the delay on purpose, just leave the door closed. The dishwasher will start on its own when the countdown ends.
When to call a technician
No technician is needed for this code.
Frequently asked questions
What does H01 mean on a Bosch dishwasher?
H01 is not a fault. It shows the delay start timer is on and the cycle will begin in 1 hour; H02 means 2 hours, and so on.
Which Bosch models show the H01 code?
Bosch doesn't publish a model list for this code; it appears on Bosch dishwashers with a digital display. Check your owner's manual.
Can I fix Bosch H01 myself?
Usually, yes. Most H01 problems clear with simple checks you can do at home. Start with the first step above: cancel the delay.
What if H01 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when H01 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Other Bosch dishwasher codes
- E15Water detected in the base (leak protection)
- E24Dishwasher is not draining (blocked drain path)
- E25Drain pump blocked or pump cover loose
- E22Filter is blocked
- E23Drain pump fault
- E16 / E17Water can't enter the dishwasher
- E18Water level too low
- E14Flow meter or filling problem
- E09Heating fault (meaning varies by region)
- E27Household power supply too low
- E12Limescale buildup in the heat pump
- E21Heat pump blocked
- E01-E05Control board or electronics fault
- E06Door sensor circuit fault
- E19Detergent dispenser fault
- E07 / E10CrystalDry (zeolite) drying fault
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.