LG Dryer tE2 Error Code
Thermistor fault, often in cold weather. Here is what it means and how to clear it, easiest fix first.
A temperature sensor is reading out of range. LG ties this code to cold conditions, and says it can show up during steam cycles such as SteamFresh or Steam Sanitary when the dryer is in a cold space. A frozen or blocked outside vent can also cause it.
On steam models it may appear during SteamFresh, Steam Sanitary or other steam-option cycles. If it keeps appearing in warm conditions, treat it like tE1 (a sensor or wiring fault). Parts guides describe tE2 as the outlet thermistor on many models.
How to fix LG tE2
Clear the outside vent
Check that the outside vent is free of snow, ice, lint and debris and that its flaps move freely. Clean the lint screen as well.
Warm the dryer up
Run the empty dryer on another heated cycle for a few minutes to warm the drum, then try your cycle again. On steam models, LG also suggests running SteamFresh with extra time (the bulky-item setting) to bring it up to temperature.
Reset the controls
Unplug the dryer or switch off its breaker, press and hold Start/Pause for 5 seconds, then restore power and run a cycle.
When to call a technician
If tE2 keeps coming back in normal room temperatures with a clear vent, the thermistor or its wiring needs to be checked by a technician.
Parts that commonly cause tE2
- thermistor
- wire harness
Order parts by your exact model number so they fit.
Other LG dryer codes
- d80Exhaust vent is restricted (Flow Sense)
- tE1Temperature sensor (thermistor) fault
- HSMoisture (humidity) sensor problem
- dEDoor is not closed
- F0Lint filter not detected
- nPNo power reaching the heater
- PSWrong voltage through the power cord
- PFPower was interrupted
- gASGas dryer is not getting gas
- AddAdd water for steam
- E13Drain problem (heat pump and hybrid dryers)
- LEDrum or motor not turning properly
- CLChild Lock is on
Frequently asked questions
What does tE2 mean on a LG dryer?
A temperature sensor is reading out of range. LG ties this code to cold conditions, and says it can show up during steam cycles such as SteamFresh or Steam Sanitary when the dryer is in a cold space. A frozen or blocked outside vent can also cause it.
Can I fix LG tE2 myself?
Often. The first steps above are safe checks a homeowner can do. If they don't clear tE2, the cause is likely a worn part that needs replacing.
What if tE2 keeps coming back?
A code that returns after a reset and the checks above usually means a part is wearing out. Note when tE2 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.