Home › Maytag › Dryers › F2 E4 / F2 E5
Maytag Dryer F2 E4 / F2 E5 Error Code
Control panel internal fault on Maytag dryers.
The user interface, the board behind the buttons and display, has reported an internal failure. Sears PartsDirect lists both codes as a software or hardware problem inside that control. A power reset is worth trying once before booking service.
Compatible models
Centennial dryers from Maytag, per Sears PartsDirect.
Also shown as
Sears PartsDirect lists both codes on Centennial dryers.
Difficulty
Try the basic checks, but the usual fix is a technician's job.
Not sure you are reading the code right? See how to read Maytag dryer codes.
How to fix Maytag F2 E4 / F2 E5
Power reset
Switch off the breaker(s) for a full minute, switch them back on, run Timed Dry and keep an eye on the display for a minute.
Record the details
If it comes back, note the exact code and the model and serial number from the label around the door opening. The repair usually means ordering a board for your exact model.
When to call a technician
Sears PartsDirect's fix is a new user interface control. Replacing it means opening the console, so leave it to a technician.
Parts linked to F2 E4 / F2 E5
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Frequently asked questions
Which Maytag models show the F2 E4 / F2 E5 code?
Centennial dryers from Maytag, per Sears PartsDirect.
Can I fix Maytag F2 E4 / F2 E5 myself?
Only the basic checks. You can safely try the steps above, but F2 E4 / F2 E5 usually points to a part or fault that needs a technician.
Other Maytag dryer codes
- AF / F4 E3Airflow restricted: check the lint screen and vent
- PFPower failure interrupted the cycle
- L2 / F4 E4Low or missing line voltage on an electric dryer
- ERRDoor isn't closed and latched
- F2 E1A control panel button is stuck
- F1 E1Main control board fault (motor relay)
- F1 E3 / F1 E4Control unit or wiring problem
- F3 E1Exhaust thermistor failure
- F3 E2Moisture sensor failure
- F3 E3Inlet thermistor failure
- F4 E1 / F4 E2Heater relay failure
- F6 E2 / F6 E3Communication failure between boards
- F7 E1Motor system error
Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.