Maytag Dryer PF Error Code

Power failure interrupted the cycle on Maytag dryers.

Easy DIY fix

The dryer lost power partway through a cycle and is letting you know the load didn't finish. A brief outage, a breaker that tripped and reset, or a loose plug can all do it.

Compatible models

Maytag Bravos dryers per Sears PartsDirect; Maytag's own list doesn't name models.

Also shown as

Maytag's code list and the Sears PartsDirect table for Bravos dryers both show PF as a power failure. Bravos models use Start to resume and Stop to clear.

Difficulty

Most people can clear this one at home with simple checks.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Maytag dryer codes.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Maytag PF

Resume or cancel
Touch and hold Start to pick up where the cycle stopped. To start fresh instead, press Power (Stop on some models) to wipe the display.
Look at the panel
If there was no outage, check the breaker panel for a tripped dryer breaker. On an electric dryer, check both halves of the double breaker.
Inspect the cord
When PF keeps coming back, unplug the dryer and look at the plug and cord. A loose fit in the outlet, scorch marks or a crushed cord means the cord needs replacing before the dryer is used again.

When to call a technician

Frequent PF codes with steady house power point to the cord, outlet or circuit. An electrician should check the outlet; a technician can replace a damaged cord or terminal block.

Parts linked to PF

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Power cord and terminal block

Order parts by your full model number so they fit.

Step-by-step guides for this problem

DryerTroubleshootingDryer Won't Start? Door, Breaker, Fuse and Switch Checks
Most dryers that won't start have a door that isn't fully latched, a start button that wasn't held for 2 to 5 seconds, a control lock that's on, or a tripped breaker.
5 min readRead guide

Frequently asked questions

Which Maytag models show the PF code?

Maytag Bravos dryers per Sears PartsDirect; Maytag's own list doesn't name models.

Can I fix Maytag PF myself?

Usually, yes. Most PF problems clear with simple checks you can do at home. Start with the first step above: resume or cancel.

Other Maytag dryer codes

Last reviewed 2026-10-20. Codes and steps can vary by model; check your owner's manual.

Sources we checked