Search

Home › GE › Washers › Po

GE Washer Po Error Code

Slow drain (top-load). What it means, which models show it, and how to clear it, easiest fix first.

GEAll GE washer codes

Po
Easy DIY fix

The washer took longer than expected to pump out water, which often means a partial clog. The machine is warning you before the problem gets worse.

Compatible models

GE doesn't publish a model list for this code; it appears on GE washers with a digital display. Check your owner's manual.

Also shown as

Top-load, 2015-and-newer models. Shown as scrolling 'Po' on models with a display; models without one flash the Rinse light instead.

Difficulty

Most people can clear this one at home with simple checks.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix GE Po

  1. Allow for normal pauses

    A short stop of up to about 3 minutes between stages is normal on many GE washers. Give it that long before deciding it is really stuck.

  2. Straighten the drain hose

    Unplug the washer and check the drain hose behind it for kinks or flattening. The hose should run in a smooth curve to the standpipe or sink.

  3. Test the standpipe

    Remove the hose from the standpipe and pour in about a quart of water. If the water backs up or drains slowly, the clog is in the house plumbing.

When to call a technician

If the hose and house drain are clear but Po keeps appearing, or the tub stays full of water, schedule service to check the drain pump.

Parts linked to Po

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does Po mean on a GE washer?

The washer took longer than expected to pump out water, which often means a partial clog. The machine is warning you before the problem gets worse.

Which GE models show the Po code?

GE doesn't publish a model list for this code; it appears on GE washers with a digital display. Check your owner's manual.

Can I fix GE Po myself?

Usually, yes. Most Po problems clear with simple checks you can do at home. Start with the first step above: allow for normal pauses.

What if Po keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when Po appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other GE washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked