Search

Home › GE › Washers › Sud

GE Washer Sud Error Code

Too many suds. What it means, which models show it, and how to clear it, easiest fix first.

GEAll GE washer codes

Sud
Easy DIY fix

The washer sensed too much foam, usually from using non-HE detergent or too much of it. It tries to rinse and pump the suds away with added steps and may stop partway if the foam won't clear. A clogged pump or drain line can trigger the same message.

Compatible models

GE doesn't publish a model list for this code; it appears on GE washers with a digital display. Check your owner's manual.

Also shown as

Shown on GE models that display text messages; not every model has it, so check your owner's manual.

Difficulty

Most people can clear this one at home with simple checks.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix GE Sud

  1. Let the washer clear the suds

    Give the washer time to run its extra rinses. If it pauses, run a Rinse and Spin cycle with no detergent added.

  2. Switch to HE detergent and measure

    Use only detergent marked HE and fill to the line on the cap, or less for small or lightly soiled loads. Pods and very concentrated detergents need far less than older-style products.

  3. Clear the drain path

    Unplug the washer and check that the drain hose is not kinked. On front-loaders, clean the pump filter behind the lower front access door to remove lint and debris.

When to call a technician

If Sud appears even with a correct amount of HE detergent and a clear drain, have the drain pump checked.

Parts linked to Sud

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does Sud mean on a GE washer?

The washer sensed too much foam, usually from using non-HE detergent or too much of it. It tries to rinse and pump the suds away with added steps and may stop partway if the foam won't clear. A clogged pump or drain line can trigger the same message.

Which GE models show the Sud code?

GE doesn't publish a model list for this code; it appears on GE washers with a digital display. Check your owner's manual.

Can I fix GE Sud myself?

Usually, yes. Most Sud problems clear with simple checks you can do at home. Start with the first step above: let the washer clear the suds.

What if Sud keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when Sud appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other GE washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked