Choose your GE appliance
About GE
GE Appliances, based in Louisville, Kentucky, makes appliances under the GE, GE Profile and Café names. Depending on the model, GE appliances show faults as a code on the display, as a message such as H2O SUPPLY, or as a pattern of blinking lights.
GE washer error codes
- H2O SUPPLYWasher is not getting water
- E22Fill took too long
- E23Washer overfilled
- E30Washer will not drain
- E31Draining took too long
- PoSlow drain (top-load)
- SudToo many suds
- UELoad is unbalanced
GE dryer error codes
- Check VentLow airflow: the vent is likely blocked
- F09 (long dry time)Loads are taking too long to dry
- 006 / F06Stuck button on the control panel
- 007 / F07Power supply wired incorrectly
- 008 / 00d / F08Door switch reads as stuck closed
- 001 / 002 / 003 / 004Temperature sensor (thermistor) fault
- tEOutlet thermistor circuit fault
- 005 / F05Main control board fault
GE dishwasher error codes
- C1 / C2Draining is taking too long
- C3 / FTD / F56Dishwasher won't drain
- C4Overfill float stuck or sump clogged
- C5Drain time too short (underfill)
- C6Incoming water too cold
- C7Temperature sensor circuit fault
- C8Detergent cup blocked
- Cup OpenDetergent cup not closed
GE refrigerator error codes
- FFFrozen food may be thawing
- PFPower was interrupted
- CIIcemaker not working properly
- dEDefrost system not working properly
- DEDemo mode is on
- CCTemperature is out of range
- tC / tFTurboCool or TurboFreeze is running (not an error)
- Icemaker green light flashingIcemaker stuck in a fault state
Before you start
- Find your model number. It's on the rating label, usually inside the door or lid, on the frame, or on the back or side panel.
- Try a reset. Unplug the appliance or switch off its breaker for 10 minutes. Many codes are one-off glitches.
- Stay safe. Never bypass safety switches or work on live wiring, gas or refrigerant lines. Each guide tells you when to call a technician.