Maytag Washer LdU Error Code
Lid cannot unlock on Maytag washers.
The washer is trying to release the lid lock and can't. On Maytag top-loaders it's usually because something on top of the lid, like a laundry basket, is pressing down on it.
Compatible models
Maytag top-load HE washers with a locking lid.
Also shown as
No other codes are listed for this fault.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Maytag washer codes.
How to fix Maytag LdU
Take everything off the lid
Clear baskets, bottles or folded laundry off the top of the washer. Maytag says objects sitting on the lid are what stop it unlocking.
Let the washer try again
Give it a moment to release. If it stays locked, unplug the washer for 5 minutes, then plug it back in.
When to call a technician
A clear lid that still won't unlock needs Maytag or a technician. Don't pry it open.
Parts linked to LdU
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Frequently asked questions
Which Maytag models show the LdU code?
Maytag top-load HE washers with a locking lid.
Can I fix Maytag LdU myself?
Usually, yes. Most LdU problems clear with simple checks you can do at home. Start with the first step above: take everything off the lid.
Other Maytag washer codes
- F8E1Washer is filling too slowly
- F9E1Washer is taking too long to drain
- F5E1Door or lid switch does not detect it closed
- F5E2Door or lid will not lock
- F5E3Lid lock fault
- F0E5Load is off balance or too large
- SudToo many suds
- F7E1Motor or basket speed problem
- F3E1Water level sensing problem
- F6E2Control, display or wiring fault
- HCHot and cold hoses are reversed
- OLLoad is too large
- rLItems found during Clean Washer cycle
- F8E2Dispenser system problem
- LOCControl lock is on
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.