Guides Search

Home › Maytag › Washers › LOC

Maytag Washer LOC Error Code

Control lock is on on Maytag washers.

MaytagAll Maytag washer codes

LOC
Easy DIY fix

The control lock (child lock) is on, so the buttons won't respond. It's a setting, not a fault.

Compatible models

Maytag front-load washers. Maytag notes that older models use a different button and some need it held down.

Also shown as

Shown as LOC or LC. The button that turns it off, and whether you have to hold it, varies by model; check your manual.

Difficulty

Most people can clear this one at home with simple checks.

Not sure you are reading the code right? See how to read Maytag washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Maytag LOC

  1. Turn off the control lock

    Touch the Control Lock button, or hold it for a few seconds if a quick press does nothing. On older models, your manual shows which button doubles as the lock.

  2. Reset if the panel stays frozen

    If the lock light goes off but the buttons still do nothing, unplug the washer for 5 minutes, then plug it back in and try again.

When to call a technician

If the lock won't switch off and the panel stays dead after a 5-minute power reset, contact Maytag or a technician.

Step-by-step guides for this problem

Frequently asked questions

Which Maytag models show the LOC code?

Maytag front-load washers. Maytag notes that older models use a different button and some need it held down.

Can I fix Maytag LOC myself?

Usually, yes. Most LOC problems clear with simple checks you can do at home. Start with the first step above: turn off the control lock.

Other Maytag washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked