Home › Amana › Washers › F5 E2
Amana Washer F5 E2 Error Code
Door won't lock on Amana washers.
The washer tried to lock the door and couldn't. A door that looks closed but hasn't latched, clothing caught in the opening, or a drum packed too tight are the common reasons.
Compatible models
Front-load washers from Amana. No model list is published for F5 E2 or F5 E3.
Also shown as
Amana's F5 E3 article gives the same meaning (door not locking properly) and the same checks, so both codes are covered here.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Amana washer codes.
How to fix Amana F5 E2
Re-latch the door
Open the door fully and close it firmly. It can look closed without the latch catching.
Clear the opening
Tuck any clothing back inside the drum and check the latch area for packing material or debris.
Take out part of the load
If the drum is crammed, remove some items so the load can tumble freely and the door closes without pressure on it.
Reset the control
Cut the power for 5 minutes, then plug it back in and try the cycle again.
When to call a technician
If the door is latched with nothing in the way and the code keeps coming back, the door lock assembly probably needs replacing. Don't try to force or defeat the lock.
Parts linked to F5 E2
These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.
Order parts by your full model number so they fit.
Step-by-step guides for this problem
- Front Load Washer Door Won't Open? Why It's Locked and What to Do
A front-load washer keeps its door locked while there's water in the drum, while the drum is still turning, or while the inside is hot, so a door that won't open usually means the washer hasn't drained.
- Washer Won't Spin? 8 Causes and How to Fix Them at Home
A washer that won't spin is usually reacting to an unbalanced load, a low or no-spin setting, too many suds or water it can't drain.
- Washer Won't Start? 8 Things to Check Before Calling for Service
A washer that won't start usually has one of three simple problems: the control lock is on, the door or lid isn't fully latched, or the Start button wasn't held long enough (Whirlpool says up to 3 seconds on many models).
Frequently asked questions
Which Amana models show the F5 E2 code?
Front-load washers from Amana. No model list is published for F5 E2 or F5 E3.
Can I fix Amana F5 E2 myself?
Usually, yes. Most F5 E2 problems clear with simple checks you can do at home. Start with the first step above: re-latch the door.
Other Amana washer codes
- F9 E1Washer is taking too long to drain
- F8 E1Not enough water coming in
- F20No water or too little water
- F21Drain problem
- F5 E1Door switch problem
- F7 E1Motor can't reach cycle speed
- F8 E2Dispenser system problem
- F8 E3Too much water or foam
- F0 E2Too many suds in the drum
- F0 E1Clothes in the drum during Clean Washer
- ErrChange not allowed right now
- IntCycle was paused or canceled
- LoCControl Lock is on
- FdSettings returned to factory defaults
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.