Amana Washer Int Error Code
Cycle was paused or canceled on Amana washers.
Int means the cycle was paused or canceled. The washer can keep spinning and pumping out for 20 to 30 minutes after that, and Int stays up the whole time.
Compatible models
Amana front-load washers. The clearing sequence differs between models, so check your owner's manual.
Also shown as
Amana says the way to clear it varies by model, so the button sequence below may differ on yours.
Difficulty
Most people can clear this one at home with simple checks.
Not sure you are reading the code right? See how to read Amana washer codes.
How to fix Amana Int
Wait for it to drain
Give the washer up to 30 minutes to finish draining before you try anything else.
Clear the code
Press Pause/Cancel twice, then Power once.
Reset the control
If Int hangs on, unplug the washer for 5 minutes and plug it back in.
When to call a technician
If Int appears when nobody paused the washer, or comes back after a reset, contact Amana service.
Step-by-step guides for this problem
Frequently asked questions
Which Amana models show the Int code?
Amana front-load washers. The clearing sequence differs between models, so check your owner's manual.
Can I fix Amana Int myself?
Usually, yes. Most Int problems clear with simple checks you can do at home. Start with the first step above: wait for it to drain.
Other Amana washer codes
- F9 E1Washer is taking too long to drain
- F8 E1Not enough water coming in
- F20No water or too little water
- F21Drain problem
- F5 E1Door switch problem
- F5 E2Door won't lock
- F7 E1Motor can't reach cycle speed
- F8 E2Dispenser system problem
- F8 E3Too much water or foam
- F0 E2Too many suds in the drum
- F0 E1Clothes in the drum during Clean Washer
- ErrChange not allowed right now
- LoCControl Lock is on
- FdSettings returned to factory defaults
Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.