Guides Search

Home › Amana › Washers › F7 E1

Amana Washer F7 E1 Error Code

Motor can't reach cycle speed on Amana washers.

AmanaAll Amana washer codes

F7 E1
Moderate DIY

The motor can't get up to the speed the cycle calls for, and the motor speed sensor reports it. On a newly installed washer, shipping bolts that never came out are the classic cause.

Compatible models

Amana front-loaders. The shipping-bolt check matters most on a washer that was just installed.

Also shown as

No other codes are listed for this fault.

Difficulty

Start with the safe checks below; a worn part may need replacing.

Not sure you are reading the code right? See how to read Amana washer codes.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Amana F7 E1

  1. Remove the shipping hardware

    Unplug the washer and look at the back panel. All four shipping bolts and their four plastic spacers have to come out, as the installation instructions show. Left in, they cause noise, heavy shaking and error codes.

  2. Reset the control

    Once the bolts are out, keep it unplugged for 5 minutes, then plug it in and run a short cycle.

When to call a technician

Bolts out and F7 E1 keeps coming back: the motor, its speed sensor or the motor control needs a technician.

Parts linked to F7 E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Step-by-step guides for this problem

Frequently asked questions

Which Amana models show the F7 E1 code?

Amana front-loaders. The shipping-bolt check matters most on a washer that was just installed.

Can I fix Amana F7 E1 myself?

Often. The first steps above are safe checks a homeowner can do. If they don't clear F7 E1, the cause is likely a worn part that needs replacing.

Other Amana washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked