Search

Home › Whirlpool › Dryers › E1 / E2

Whirlpool Dryer E1 / E2 Error Code

Temperature sensor fault (older electronic models). What it means, which models show it, and how to clear it, easiest fix first.

WhirlpoolAll Whirlpool dryer codes

E1 / E2
May need a pro

On some Whirlpool electronic-control dryers that show E codes rather than F#E# codes, E1 and E2 point to a failed thermistor, the sensor the control uses to read dryer temperature. A loose or damaged sensor wire can produce the same code.

Compatible models

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dryers with a digital display. Check your owner's manual.

Also shown as

Sears PartsDirect lists this meaning for Whirlpool electronic-control models; newer models with F#E# codes use different codes for sensor faults. Whirlpool's own E1 page gives only a reset procedure, so check your manual for your model's meaning.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool E1 / E2

  1. Reset the dryer

    Switch off the breaker(s), or unplug the dryer, for 5 minutes. Restore power, start a Timed Dry cycle, and watch for about 1 minute to see if the code comes back.

  2. Clean the lint screen

    With the dryer unplugged, clean the lint screen and check that the vent is not crushed. Good airflow keeps temperatures normal and reduces the fire risk from lint.

When to call a technician

If the code returns, the thermistor needs to be tested and probably replaced by a technician. On a gas dryer, if you smell gas, leave the house right away and call the gas company from outside.

Parts linked to E1 / E2

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does E1 / E2 mean on a Whirlpool dryer?

On some Whirlpool electronic-control dryers that show E codes rather than F#E# codes, E1 and E2 point to a failed thermistor, the sensor the control uses to read dryer temperature. A loose or damaged sensor wire can produce the same code.

Which Whirlpool models show the E1 / E2 code?

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dryers with a digital display. Check your owner's manual.

Can I fix Whirlpool E1 / E2 myself?

Only the basic checks. You can safely try the steps above, but E1 / E2 usually points to a part or fault that needs a technician.

What if E1 / E2 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when E1 / E2 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Whirlpool dryer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked