Search

Home › Whirlpool › Dryers › F6E1 / F6E2 / F6E3

Whirlpool Dryer F6E1 / F6E2 / F6E3 Error Code

Communication error between control boards. What it means, which models show it, and how to clear it, easiest fix first.

WhirlpoolAll Whirlpool dryer codes

F6E1 / F6E2 / F6E3
May need a pro

The main control board and the control panel (user interface) have stopped talking to each other properly. Whirlpool points to the main board, the user interface, or the wiring between them. A loose connector after the dryer has been moved or serviced is one possible cause.

Compatible models

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dryers with a digital display. Check your owner's manual.

Also shown as

Maytag Centennial dryers also use F6 E2 and F6 E3 for a communication failure. Older Duet dryers show F:70 or F:71 when the boards cannot communicate.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the dryer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool F6E1 / F6E2 / F6E3

  1. Reset the dryer

    Switch off the dryer's breaker(s), or unplug it, for 1 minute. Restore power, start a Timed Dry cycle, and watch for about 1 minute to see if the code returns.

  2. Think about recent moves or repairs

    If the dryer was recently moved or repaired, mention it when you book service. A harness that was knocked loose is quicker to fix than a failed board.

When to call a technician

If the code comes back, a technician needs to check the wire harness and boards inside the console. Don't open the control panel yourself.

Parts linked to F6E1 / F6E2 / F6E3

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does F6E1 / F6E2 / F6E3 mean on a Whirlpool dryer?

The main control board and the control panel (user interface) have stopped talking to each other properly. Whirlpool points to the main board, the user interface, or the wiring between them. A loose connector after the dryer has been moved or serviced is one possible cause.

Which Whirlpool models show the F6E1 / F6E2 / F6E3 code?

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool dryers with a digital display. Check your owner's manual.

Can I fix Whirlpool F6E1 / F6E2 / F6E3 myself?

Only the basic checks. You can safely try the steps above, but F6E1 / F6E2 / F6E3 usually points to a part or fault that needs a technician.

What if F6E1 / F6E2 / F6E3 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when F6E1 / F6E2 / F6E3 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Whirlpool dryer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked